How to use multiple times for a long time with one instantaneous adhesive(instant glue).

We buy an instant glue, use it, and store it for another use. It's because there's quite a lot left to use once and throw away. But the next time you use the glue, it's often hardened and you have to buy a new one.

Why does this happen? The reason is that the adhesive was stored in the wrong way. It's a relief that the adhesive opening is simply blocked and needs to be pierced again with a pin. In some cases, the glue leaked or hardened, so you had to throw it away altogether. 

Now we're going to show you how to store the instantaneous adhesive to the end of all remaining solutions. 

1. Wipe the inlet nozzle area well with tissue after using the adhesive. Then, straighten the barrel vertically and tap it to bring the adhesive solution in the nozzle area down as much as possible. And keep it in a cool, out of sunlight. 

2. Make sure that there is no adhesive left in the inlet nozzle as much as possible

It does not harden the next time you use it. After using the adhesive, press the bottom of the plastic container once or twice before closing the lid to make a sound of air coming out of the nozzle, and it is well pierced.

3. When storing the adhesive, put a silica gel in the zipper pack to seal it well and store it in a cool place. This way, the glue doesn't harden and the entrance doesn't block, so you can use it well until the end of the glue solution for a long time.

Additional points to note. Do not store the glue lying down. Make sure to put it vertically and store it in a drawer.